Products

DESCRIPTION

Basic Info.

Model NO.	Clamp-type turbine flowmeter
Atmospheric Pressure	86kpa~106kpa
Relative Humidity	65%
Transmission Distance	≤1000m
Degree of Protection	IP65
Power Supply	24V DC
General Specifications	Inch Pipe Thread (External Thread)
Ambient Temperature	20ºC
Other Specifications	Internal Thread, NPT Thread, etc
Range Ratio	1:10; 1:15; 1:20
Temperature of Measured Medium (ºC)	-20ºC~+110ºC
Transport Package	Standard Export Packing
Specification	Customized
Trademark	Shengda
Origin	China
HS Code	9026100000

Product Description

Product Description:
The clamp-type turbine flowmeter is a new generation of turbine flowmeter with a simple structure, light weight, high accuracy, good reproducibility, sensitive response, convenient installation, maintenance, and use, which is widely used to measure the corrosion of stainless steel 1Cr18Ni9Ti, 2Cr13, corundum Al2O3 and hard alloy in closed pipes, and is free of fibers, particles, and other impurities.
Technical parameter:

Measuring medium	No impurities, no strong corrosivity, low viscosity liquid
Executive standards	Turbine flow sensor (JB/T9246-1999)
Verification regulation	Turbine flowmeter (JJG1037-2008)
Instrument diameter and connection mode	Flange connection type	DN15-DN200
	Threaded connection type	DN4-DN50
	Clamp connection type	DN25-DN50
Flange standard	General standards	GB/T9113-2000
	Other standards	International Pipe Flange Standard	Such as German standard DIN, American standard ANSI, Japanese standard JIS
		Domestic pipe flange standards	Such as the standards of the Ministry of Chemical Industry and the Ministry of Machinery
Thread size	General specifications	Inch pipe thread (external thread)
	Other specifications	Internal thread, NPT thread, etc
Accuracy class and corresponding repeatability	Accuracy class	±1%R	±0.5%R	±0.2%R (To be customized)
	Linearity	≤0.15%	≤0.1%	≤0.03%
Range ratio	1:10; 1:15; 1:20
Instrument material	304stainless steel; 316stainless steel
Temperature of measured medium (ºC)	-20ºC~+110ºC
Verification conditions	Environment condition	Ambient temperature	20ºC
		Relative humidity	65%
	Calibration device	Standard meter method liquid flow verification device
		Liquid flow verification device with static mass method
Use condition	Ambient temperature	-20ºC~+60ºC	Relative humidity	5%~90%
	Atmospheric pressure	86Kpa~106Kpa
Output signal	Pulse frequency signal
	Two wire 4-20mA DC current signal
	485 communication
Power supply	24V DC
Transmission distance	≤1000m
Signal line interface	Basic type: Hesmann connector, explosion-proof type: internal thread M20 * 1.5
Explosion proof grade	Basic type: non explosion-proof product, explosion-proof type: Exd II CT6 Gb
Degree of protection	IP65

Product specifications:
High precision, generally up to ± 1% R, ± 0.5% R, high precision type up to ± 0.2% R;
Good repeatability, short-term repeatability can reach 0.05%~0.2%;
Output pulse frequency signal, suitable for total metering and computer connection, no zero drift, strong anti-interference capability;
A high frequency signal (3-4kHz) can be obtained with strong signal resolution;
Wide range, up to 1:20 for medium and large calibers and 1:10 for small calibers;
Compact and light structure, convenient installation and maintenance, and large circulation capacity;
It is suitable for high voltage measurement. There is no need to open a hole in the meter body, and it is easy to make a high voltage instrument;
There are many types of special sensors, which can be designed as various special sensors according to the special needs of users;
It can be made into a plug-in type, suitable for large diameter measurement, with small pressure loss, low price, and easy installation and maintenance.

FAQ

Q: Are you trading company or manufacturer ?

A: We are factory located in Jiangyin Jiangsu Province.

Q: Does your company provide customized manufacturing?

A: We provide OEM/ODM service to our customers. Our experienced R&D team will give our customer solution in a high efficiency way.

Q: How long is your delivery time?

A: 3-5 working days for the items were in stock, 15-30days for the items out of stock.

Q: If I need a sample for pretest, do you sale sample for this inquiry?

A: Yes, we can sale sample for pretest. If you need this service, please contact us and we will give you a quotation.

Q: What is your terms of payment ?

A: Order amount less than $3000, 100% paid before shipment, order amount more than $3000,30% as deposit, 70% before shipment, or by negotiated for the both parties.

Please contact us for the WHOLE CATALOGUE, our technical engineers are waiting for solving your problems now!! Action now!!